File _service:extract_file:OHPC_macros of Package opari2-gnu16

# OpenHPC build script/utilities
#
#-----------------------------------------------------------------------
# Licensed under the Apache License, Version 2.0 (the "License"); you
# may not use this file except in compliance with the License. You may
# obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
# implied. See the License for the specific language governing
# permissions and limitations under the License.
#-----------------------------------------------------------------------

# Top-level OpenHPC installation paths
%global PROJ_NAME       ohpc
%global OHPC_HOME       /opt/%{PROJ_NAME}
%global OHPC_ADMIN      %{OHPC_HOME}/admin
%global OHPC_PUB        %{OHPC_HOME}/pub
%global OHPC_APPS       %{OHPC_PUB}/apps
%global OHPC_BIN        %{OHPC_PUB}/bin
%global OHPC_COMPILERS  %{OHPC_PUB}/compiler
%global OHPC_LIBS       %{OHPC_PUB}/libs
%global OHPC_MODULES    %{OHPC_PUB}/modulefiles
%global OHPC_MODULEDEPS %{OHPC_PUB}/moduledeps
%global OHPC_MPI_STACKS %{OHPC_PUB}/mpi
%global OHPC_UTILS      %{OHPC_PUB}/utils
%global debug_package   %{nil}

%{!?dist: %global dist 400.ohpc}
%{!?PROJ_DELIM: %global PROJ_DELIM -ohpc}

# Update package docs location to include version info (to allow
# possibility of coinstall of multiple package versions)
DocDir:    %{OHPC_PUB}/doc/contrib
%global _docdir_fmt     %{name}-%{version}

# Define PNAME which can be used in modulefile generation for env vars (derived
# from pname defined in each component .spec file)
%define PNAME %(echo %{pname} | tr [a-z] [A-Z] | tr - _)

# Definition to replace dots in %%version with underscores
%define version_exp %(tr "." "_" <<< %{version})

# Instead of having Source[1-9]: OHPC_macros in every SPEC file,
# this sets Source42 for all SPEC files which include OHPC_macros.
Source42: OHPC_macros

# Pull in the SHA-512 checksum manifest (SOURCES/ohpc.checksums) when
# present.  The manifest is consumed by the macros.ohpc-source-verify
# RPM macro (installed by ohpc-buildroot) to verify source file integrity
# at the start of %prep.  The conditional avoids build failures for
# packages that have not yet adopted source verification.
# Note: the file is named "ohpc.checksums" (not "sources") to avoid
# collisions with COPR's lookaside-cache "sources" file.
# See also: misc/gen_sources_checksum.sh
%if %(test -e %{_sourcedir}/ohpc.checksums && echo 1 || echo 0)
Source43: ohpc.checksums
%endif

# OpenHPC packages also require ohpc-buildroot to access macros used to define
# compiler and MPI families
%if 0%{!?ohpc_bootstrap:1}
Requires: ohpc-filesystem
BuildRequires: ohpc-buildroot
%endif

# OpenHPC convention: the default build configuration for compiler/MPI
# dependent packages assumes the gnu compiler and openmpi family; however,
# these choices can be overridden by specifing the compiler_family/mpi_family
# variables via rpmbuild or other mechanisms.

%{!?compiler_family: %global compiler_family gnu16}
%{!?mpi_family: %global mpi_family openmpi5}
%{!?python_family: %global python_family python3}

# Disable warning during build concerning source_date_epoch_from_changelog
%if 0%{?rhel} >= 10
# This is necessary so that the RPM linker flags do not leak into
# the packages. Without this some wrappers like mpicc are re-using
# the RPM flags and then they require certain RPM environment variables
# to bet set. Without those variables builds starts to fail.
%undefine _package_note_flags
%undefine source_date_epoch_from_changelog
%global __brp_check_rpaths %{nil}
%endif

# Compiler dependencies
%if 0%{?ohpc_compiler_dependent} == 1

%if "%{compiler_family}" == "gnu16"
BuildRequires: gnu16-compilers%{PROJ_DELIM} >= 16.1.0
Requires:      gnu16-compilers%{PROJ_DELIM} >= 16.1.0
%global gnu_family gnu16
%endif
%if "%{compiler_family}" == "gnu15"
BuildRequires: gnu15-compilers%{PROJ_DELIM} >= 14.1.0
Requires:      gnu15-compilers%{PROJ_DELIM} >= 14.1.0
%global gnu_family gnu15
%endif
%if "%{compiler_family}" == "gnu14"
BuildRequires: gnu14-compilers%{PROJ_DELIM} >= 14.1.0
Requires:      gnu14-compilers%{PROJ_DELIM} >= 14.1.0
%global gnu_family gnu14
%endif
%if "%{compiler_family}" == "gnu13"
BuildRequires: gnu13-compilers%{PROJ_DELIM} >= 13.1.0
Requires:      gnu13-compilers%{PROJ_DELIM} >= 13.1.0
%global gnu_family gnu13
%endif
%if "%{compiler_family}" == "gnu12"
BuildRequires: gnu12-compilers%{PROJ_DELIM} >= 12.1.0
Requires:      gnu12-compilers%{PROJ_DELIM} >= 12.1.0
%global gnu_family gnu12
%endif
%if "%{compiler_family}" == "gnu9"
BuildRequires: gnu9-compilers%{PROJ_DELIM} >= 9.2.0
Requires:      gnu9-compilers%{PROJ_DELIM} >= 9.2.0
%global gnu_family gnu9
%endif

%if "%{compiler_family}" == "intel"
BuildRequires: gcc-c++ intel-compilers-devel%{PROJ_DELIM}
Requires:      gcc-c++ intel-compilers-devel%{PROJ_DELIM}

%global __requires_exclude ^lib(cilkrts|ifcoremt|ifport|imf|intlc|iomp5|irc|irng|mkl_.*|svml)\\.so(\\.[25])?\$.*\$\$64bit\$$
%global toolchain clang
%global _lto_cflags %{nil}
%endif

%if "%{compiler_family}" == "arm1"
BuildRequires: arm1-compilers-devel%{PROJ_DELIM}
Requires:      arm1-compilers-devel%{PROJ_DELIM}
%endif

%if "%{compiler_family}" == "llvm"
BuildRequires: llvm-compilers%{PROJ_DELIM} >= 9.0.0
Requires:      llvm-compilers%{PROJ_DELIM} >= 9.0.0
%endif

# Disable annobin on RHEL based systems
%if 0%{?rhel} >= 8
%undefine _annotated_build
%undefine _hardened_build
%endif
%endif

# Disable generation of .build-id links
%global _build_id_links none

# Disable RPM symlink analysis on files in %%{OHPC_HOME}.
%global __libsymlink_exclude_path  %{OHPC_HOME}/.*$

# MPI dependencies
%if 0%{?ohpc_mpi_dependent} == 1
%if "%{mpi_family}" == "impi"
BuildRequires: intel-mpi-devel%{PROJ_DELIM}
Requires:      intel-mpi-devel%{PROJ_DELIM}
%if "0%{?__requires_exclude}" == "0"
%global __requires_exclude ^libmpi\\.so.*$|^libmpifort\\.so.*$|^libmpicxx\\.so.*$
%else
%global __requires_exclude %{__requires_exclude}|^libmpi\\.so.*$|^libmpifort\\.so.*$|^libmpicxx\\.so.*$
%endif
%endif
%if "%{mpi_family}" == "mpich"
BuildRequires: mpich-%{compiler_family}%{PROJ_DELIM}
Requires:      mpich-%{compiler_family}%{PROJ_DELIM}
%endif
%if "%{mpi_family}" == "mvapich2"
BuildRequires: mvapich2-%{compiler_family}%{PROJ_DELIM}
Requires:      mvapich2-%{compiler_family}%{PROJ_DELIM}
%endif
%if "%{mpi_family}" == "openmpi3"
BuildRequires: openmpi3-%{compiler_family}%{PROJ_DELIM}
Requires:      openmpi3-%{compiler_family}%{PROJ_DELIM}
%endif
%if "%{mpi_family}" == "openmpi4"
BuildRequires: openmpi4-%{compiler_family}%{PROJ_DELIM}
Requires:      openmpi4-%{compiler_family}%{PROJ_DELIM}
%endif
%if "%{mpi_family}" == "openmpi5"
BuildRequires: openmpi5-%{compiler_family}%{PROJ_DELIM}
Requires:      openmpi5-%{compiler_family}%{PROJ_DELIM}
%endif
%endif

# Python dependencies and macros
%if 0%{?ohpc_python_dependent} == 1
%global python_module_prefix py3-
%if 0%{?rhel} == 9
%global python_prefix python3.11
%global __python /usr/bin/python3.11
%global python3_pkgversion 3.11
%global python_lib_dir python%{python3_pkgversion}
BuildRequires: %{python_prefix}-rpm-macros
%else
%if 0%{?sle_version} >= 150500
%global python_prefix python311
%global __python /usr/bin/python3.11
%global python3_pkgversion 3.11
%global python3_version %{python311_version}
%global python3_sitearch %{python311_sitearch}
%global python_lib_dir python%{python3_pkgversion}
BuildRequires: python3-rpm-macros
%else
%global python_prefix python3
%global __python %__python3
%global python_lib_dir python%{python3_version}
BuildRequires: %{python_prefix}-rpm-macros
%endif
%endif
%global python_site_dir %{python3_sitearch}
BuildRequires: %{python_prefix}-devel
BuildRequires: %{python_prefix}-setuptools
Requires:      %{python_prefix}
%endif

# Single-line macro for running compiler/MPI setup scripts
# Script bodies are evaluated and stored in this macro definition
%global ohpc_setup_compiler %{expand:
%{?OHPC_CFLAGS:export OHPC_CFLAGS=%{OHPC_CFLAGS}}
%{?OHPC_CXXFLAGS:export OHPC_CXXFLAGS=%{OHPC_CXXFLAGS}}
%{?OHPC_FCFLAGS:"export OHPC_FCFLAGS=%{OHPC_FCFLAGS}}
%{?OHPC_F77FLAGS:"export OHPC_F77FLAGS=%{OHPC_F77FLAGS}}
%{?OHPC_USE_CCACHE:export OHPC_USE_CCACHE=%{OHPC_USE_CCACHE}}
. %{OHPC_ADMIN}/ohpc/OHPC_setup_compiler %{compiler_family}}

%if 0%{?ohpc_mpi_dependent} == 01
%global ohpc_setup_compiler %{expand:
%{ohpc_setup_compiler}
. %{OHPC_ADMIN}/ohpc/OHPC_setup_mpi %{mpi_family}}
%endif

# Lua version
%if 0%{!?luaver:1}
# Set luaver to lua_version if it exists
%if 0%{?lua_version:1}
%global luaver %{lua_version}
%else
# Set default Lua version to 5.1, the version used by CentOS 7
%global luaver 5.1
# Lua 5.2 is used by older SUSE
%if 0%{?suse_version} >= 1200 && 0%{?suse_version} < 1350
%global luaver 5.2
%endif
# Lua 5.3 is used by OpenSUSE/SLES 15 and RHEL/CentOS 8
%if 0%{?sle_version} >= 150000 || 0%{?rhel_version} >=800
%global luaver 5.3
%endif
%endif
%endif

# check if user desires to override package and modulefile naming with
# custom delimiter (e.g optimized micro-architecture build)

%global OHPC_CUSTOM_PKG_DELIM %{nil}

%{?OHPC_CUSTOM_DELIM: %global OHPC_CUSTOM_PKG_DELIM -%{OHPC_CUSTOM_DELIM}}
%{?OHPC_CUSTOM_DELIM: %global PROJ_DELIM -%{OHPC_CUSTOM_DELIM}%{PROJ_DELIM}}

# Handle different package names accross distributions.

%if 0%{?sle_version}
%global procps procps
%else
%global procps procps-ng
%endif